| INTRODUCTION E-glass spray up roving is a multi-end product and uses a special sizing. These products are suitable for FRP spray up forming process. The typical products are boats, marine accessories, automotive accessories, bathtubs, bathroom appliances, storage tanks, etc. The roll should be pulled from the "inside" in most cases, but can be pulled from the "outside" when a hard core is used.
PRODUCT CHARACTERISTICS
| 1.Tex is stable with uniform strand splitting. |
| 2. Medium stiffness, good choppability and good chopped strand dispersion. |
| 3. Low Fuzz. |
| 4. Good anti-static properties. |
| 5. Quick resin wet out and easy air release |
ECHNICAL SPECIFICATIONS
| R2O Content |
£¼0.8% |
| Coupling Agent |
Silane |
| Compatible Resin |
Polyester |
| Filament Diameter |
13um |
| Moisture Content |
¡Ü0.2% |
| LOI |
1.2%¡À0.25% |
MPLEMENTATION STANDARDS
| Bending Strength |
289 MPa |
| Bending Modulus |
9.8 Gpa |
| Resin Content |
56.1% |
|
 |
This product meets the requirements of Q/TTG003-1998 codes. The product have obtained the quality certification of Norway Boat Code.
PRODUCT SPECIFICATIONS*
Reference No. |
Tex |
Roll Weight (kg) |
|
2400 |
18 |
|
3100 |
18 |
*Special products are available according to customer¡¯s requirements.
PACKAGING:
| Roll diameter is 26 cm. Each roll weight is 18kg. Rolls are wrapped in plastic bags, then packed in cartons, then on pallet. |
| Normal Packing : 18kg of each roll, 48 rolls in a carton or 64 rolls in a carton, 1 carton on a pallet. |
| 1¡Á20¡¯FCL£½[10 Pallets (48 rolls / pallet)] £« [10 Pallets (64 rolls / pallet)] |
|
E-GLASS SPRAY UP ROVING