INTRODUCTION
E-glass SMC roving is a multi-end product and uses a special sizing. These products are suitable manufacturing chairs, water tanks, automobile parts, etc.
PRODUCT CHARACTERISTICS
| 1. Low Fuzz. |
| 2. Good anti-static properties. |
| 3. Good flowability in the mold. |
| 4. Good mechanical properties. |
TECHNICAL SPECIFICATIONS
| R2O Content |
＜0.8% |
|
| Coupling Agent |
Silane |
| Filament Diameter |
14um |
| Moisture Content |
≤0.2% |
| LOI |
1.4%±0.25% (T949C3) or 1.45%±0.25% (T949QZ) |
| Applicable Resin |
Polyester、Vinylester |
| |
|
IMPLEMENTION STANDARDS
| Bending Strength 187 MPa |
| Fiberglass Content 26.3% |
*Reference data only – not for technical specifications
PRODUCT SPECIFICATIONS
Product Code |
Tex |
Roll Weight (kg) |
ERS240-T949C3 |
2400 |
17 |
ERS240-T949QZ |
2400 |
17 |
ERS480-T949C3 |
4800 |
17 |
ERS480-T949QZ |
4800 |
17 |
*Special products are available according to customer’s requirements.
PACKAGING
Roll diameter is 26 cm. Each roll weight is 20kg. Rolls are wrapped in plastic bags, then packed in cartons, then on pallet.
Normal Packing : 20kg of each roll, 48 rolls in a carton or 64 rolls in a carton, 1 carton on a pallet.
1×20’FCL＝[10 Pallets (48 rolls / pallet)] ＋ [10 Pallets (64 rolls / pallet)]
|
E-GLASS SMC ROVING
