INTRODUCTION

  E-glass pultrusion & filament winding multi-end rovings are suitable for FRP pultrusion and filament winding processes. Typical products are pultrusion materials, high voltage insulating rod, pipe, storage tanks, etc. For most applications the fiberglass strand is pulled from the "inside", but can be pulled from the "outside" when a hard core is used.

RODUCT CHARACTERISTICS
1. Tex is stable and has low fuzz.
2. Quick resin wet out and high mechanical strength of the composite.
3. Uniform strand tension
4. Product available in a variety of Tex values with "inside" or "outside" pull.

TECHNICAL SPECIFICATIONS

R2O Content	＜0.8%
Coupling Agent	Silane
Moisture Content	≤0.1%
LOI	0.6±0.20%
Filament Diameter	14um

 

OVING PROPERTIES & POLYESTER ROD FLEXURAL PROPERTIES*

Roving Tensile Strength	0.45 N/TEX
Polyester Rod Flexural Strength	(Std. condition)1163 MPa
(GB/T 14208-1993) (Wet Condition)	961 MPa
*Reference data only – not for technical specifications

RODUCT SPECIFICATIONS* *Special products are available according to customer’s requirements.

 PACKAGING

Roll diameter is 26 cm. Each roll weight is 20kg. Rolls are wrapped in plastic bags, then packed in cartons, then on pallet.

Normal Packing : 20kg of each roll, 48 rolls in a carton or 64 rolls in a carton, 1 carton on a pallet.

1×20’FCL＝[10 Pallets (48 rolls / pallet)] ＋ [10 Pallets (64 rolls / pallet)]