Brief Introduction: Alkali-resistant (AR) fiberglass, characterised by good alkali-resistance and high corrosion-resistance in cement and other alkali medium, has been used to reinforce cement, gypsum and other inorganic materials. Fiberglass Reinforced Cement (GRC) is a new type of inorganic composite building material. As a light, high strength, incombustible, designable and easy shaped material, it has been widely used in building industry nowadays in the world.

Our Products have won the third prize of National Science and Technology Advancement and the second award of Science and Technology Advancement of our country.

The quality of our products can meet the following International Standard: Franch "Cem-fil-Ⅱ" Japan Minelion-L, USA"D578-98" GRC" GRCA S0105/0286" Our products are in compliance with the requirements of PCI, USA (Prestressed Concrete Institution, USA) and international GRC institution.

1. Alkali-resistant glass fiber roving: Two types of Alkali-resistant glass fiber roving: Roving (ZrO2≥14.5%) and High performance Roving (ZrO2≥16.5%). Roving (ZrO2≥14.5%) designed for use in the low alkali early strength concrete. The alkali resistance meet the requirements

High performance AR roving (ZrO2≥16.5%) enabled to resist the very high alkalinity produced by the hydration of Ordinary Portland Cement. The alkali resistance meet the designation requirements of the Japan"NEG" and French "Cem-FIL-Ⅱ". the durability reach 50 over years and half life period reach 100 over years.

AR-GLASS FIBRE	E-GLASS FIBRE

These fibres resisted the very high alkalinity produced by the hydration of Ordinary Portaland Cement and Exhibits a high degree of resistance to acids and alkalis, and have high strand tensile strength. Soaked in 100℃ saturated Ca(OH)2 solution for 4 hours, remained filament strength>82%. Soaked in 100℃, 10% NaOH solution for 1 hour, weigh loss<5%.

Alkali-resistant glass fiber Roving used for spray up or mechanical continuous foming GRC.

2. Alkali-resistant Chopped strand Two types of Alkali-resistant Chopped Strand: premix and water dispersible. Premix chopped strand is treated by reinforced size. The abrasion resistant、bundle state、stiffness and durability is very good.

Premix chopped strand used for site construction and premixed GRC.

Water dispersible chopped strand have a sizing system which is water dispersible, allowing full dispersion into individual filaments in mixing in an aqueous environment. They incorporate easily into mixes giving a very large number of distributed reinforcing fibres from a small weight of product.

Water dispersible chopped strand used at a low level of addition to prevent cracking & improve the performance of ready mix concrete, floor screeds, rendersorother special mortar mixes.