INTRODUCTION
E-glass chopped strand mat is made from fiberglass strands chopped to length and bonded together with powder binder. Chopped strand mat is used primarily for hand lay-up processes, filament winding and press molding of FRP products. Typical products include bathroom accessories, pipe, building materials, automobiles, furniture and other FRP products.
| PRODUCT CHARACTERISTICS
1. Low Fuzz, dirt, impurity and other stains.
2. Fast Wet-out.
3. Even thickness.
4. Good covering and degassing properties.
5. High mechanical strength and high wet strength retention.
TECHNICAL SPECIFICATIONS
R2O Content £¼0.8%
Compatiable Resin Polyester
Fiber Diameter 13um
Moisture Content ¡Ü0.2%
LOI 2~8%
Binder type Powdered or Emulsion polyester
Styrene Solubility £¼50 seconds
Speed of wet-out £¼60 seconds |
|
IMPLEMENTION STANDARDS
This product meets the requirements of GB/T17470-1998 codes. EMC300, EMC450, EMC600 and EMC900 have obtained the quality certification of Norway Boat code.
POLYESTER LAMINATE STRENGTH PROPERTIES*Reference data only ¨C not for technical specifications
Tensile Strength |
126Mpa |
Tensile Modulus |
10.4Gpa |
Elongation |
1.6% |
Bending Strength |
284Mpa |
Bending modulus |
11.9Gpa |
Resin Content |
.59.5% |
PRODUCTS SPECIFICATIONS
Model No. |
Powder Bounded |
Emulsion Bounded |
EMC300 |
EMC450 |
EMCL250 |
EMCL300 |
EMCL450 |
Unit Weight (g/m2) |
300 |
450 |
250 |
300 |
450 |
Roll Width (mm) |
965, 1000, 1040, 1270, 1524, 1778, 2080 |
ROLL WEIGHT SPECIFICATIONS (Unit: kg)
Roll Width (mm) |
965 |
1000 |
1040 |
1270 |
1524 |
1778 |
2080 |
Roll Weight (kg) |
33 |
35 |
36 |
44 |
53 |
62 |
73 |
PACKAGING
Chopped strand mat products are rolled around a mandrel with an inside diameter of 10.5cm. Each roll has an ousted diameter of 30cm. The rolled products are wrapped with plastic bags and placed in hard cardboard boxes. Cardboard boxes are placed on pallets, which is wrapped with plastic shrink-wrap.
* Special packaging is according to customer's requirements.
|
E-GLASS CHOPPED STRAND MAT
